034Motorsport M11 Head Stud Kit EA839 2.9T/3.0T

034Motorsport M11 Head Stud Kit EA839 2.9T/3.0T

The 034Motorsport Head Stud Kit for EA839 2.9T/3.0T is designed to maintain reliable clamping force under sustained heat and load, addressing the limitations of OE torque-to-yield head bolts that can stretch and degrade at higher power levels. These high-strength Head Studs remove the risk of cylinder head lifting during prolonged high-performance driving.

Featuring M11 high-strength tool steel studs with laboratory-verified tensile strength beyond 270,000 psi, this fully reusable kit provides an 80% strength increase over OE head bolts. Engineered as part of our EA839 engine upgrade catalog, it helps future-proof EA839 builds for track use, extended pulls, and other high-powered applications in extreme horsepower scenarios.

Product Description:

The 034Motorsport Head Stud Kit, M11, EA839 2.9T/3.0T is designed for customers looking to safely increase and maximize power on the EA839 platform. As boost pressure and cylinder pressure rise with more aggressive tuning, factory torque-to-yield head bolts can stretch and lose clamping force, particularly under sustained heat and load. These M11 head studs are engineered to remove that limitation and provide the clamping force required for high-power operation.

Manufactured from high-strength tool steel and laboratory verified to exceed 270,000 psi tensile strength, these studs are 80% stronger than OE head bolts and fully reusable. They help prevent head lift during extended pulls, track use, and other high-duty-cycle driving, allowing tuners and builders to run higher boost and increased power levels confidently.

Head Stud Kit Features:

Studs

• Utilizes M11 High-Strength Tool Steel Studs
• Manufactured From High-Strength Tool Steel
• Able to Support High Power Builds
• Hex-Drive End For Easy Installation
• Tensile Strength Beyond 270,000 psi (1850 N/mm²), Laboratory Verified using ASTM F606/F606M-25 Testing Standards
• 80% Stronger Than OE Head Bolts
• Reusable Design Unlike OE Torque-To-Yield Bolts

Nuts

• Manufactured From High-Strength Tool Steel
• Strength Matched To The Studs
• 12-Point Drive For Precise And Consistent Tightening Torque

Note: Engine block and cylinder head machining or modification is required to accept these M11 head studs.

Part Number Interchange:

• WHT 005 739 (B9)
• 06E 103 385 (B8)
• WHT 005 739 (B8)

What’s Included:

• 16 M11 Studs
• 16 M11 Nuts
• 16 M11 Washers
• Assembly Paste