call us for FREE estimate
Forge Motorsport Audi S4 B8 and S5 B8 3.0 TFSI Charge Cooler Radiator and Expansion Tank kit
Forge Motorsport Audi S4 B8 and S5 B8 3.0 TFSI Charge Cooler Radiator and Expansion Tank kit Forge Motorsport Audi S4 B8 and S5 B8 3.0 TFSI Charge Cooler Radiator and Expansion Tank kit Forge Motorsport Audi S4 B8 and S5 B8 3.0 TFSI Charge Cooler Radiator and Expansion Tank kit Forge Motorsport Audi S4 B8 and S5 B8 3.0 TFSI Charge Cooler Radiator and Expansion Tank kit Forge Motorsport Audi S4 B8 and S5 B8 3.0 TFSI Charge Cooler Radiator and Expansion Tank kit

Forge Motorsport Audi S4 B8 and S5 B8 3.0 TFSI Charge Cooler Radiator and Expansion Tank kit

  • SKU
    FMCCRAD2
Free shipping

Uprated Charge Cooler Radiator and Expansion Tank kit for Audi S4 B8 and S5 B8 3.0 TFSI

  • $875.00
MSRP: $1605.00, you save $730.00
  • 45% less
Qty:  

Audi S4 B8 and S5 B8 3.0 TFSI Charge Cooler Radiator and Expansion Tank kit

For the Audi S4 B8 and S5 B8 3.0 litre Supercharged, we have developed an uprated Charge Cooler Radiator and Expansion Tank kit as an evolution of our S5 kit.

There are four variations of chargecooler for the S4 B8 and B8.5 chassis. In order to purchase the correct one for your car, you will need to look at the current setup you have fitted from the factory: if you have one or two chargecooler radiators as standard, and if your car is fitted with ADS (Audi dynamic steering).

Please refer to this PDF to ascertain which is the correct part for your car.

/userfiles/Forge_motorsport_-_Audi_S4_Chargecooler_kits.pdf

 

This FMCCRAD2 kit is for the S4 and S5 with twin factory chargecoolers and no ADS cooler

This kit is highly recommended for either those in warm climates who wish to maintain performance, or specifically for tuned engines where the boost has been increased from standard on the Eaton Supercharger using software re-calibration, a reduction pulley or a combination of both. To maximise the cooling efficiency we use an alloy fast thermal transfer radiator core which is 640 x 440 x 42mm. This has proven very effective in both keeping chargecooler temperatures lower but also reducing the recovery times in "heat soaked" situations.

Click here to find out about information and care for your Forge Motorsport cooling product.

  • SKU
    FMCCRAD2
  • Brand
    Forge Motorsport
Make Model Year Engine
Audi S4 B8 (10-12) 3.0T