StopTech Sport Kit Axle Pack
Image is for illustrative purposes, please refer to product description and product images for specific details.
StopTech Sport Kit Axle Packs are pre-matched, direct-fit brake pad and rotor pairings designed to simplify brake service and brake system upgrades for virtually any car or truck on the road. They are the easiest way for drivers to replace their existing rotors and pads with high quality, premium feature, high performance components from the championship-winning team at StopTech.
Available as front axle, rear axle or 4-wheel kits, Axle Packs simplify the upgrade process by providing application-specific, pre-matched systems, that take the guesswork out of mixing and matching individual components. The rotors and pads are carefully matched to provide optimal performance for a variety of specific vehicle and driver needs.
StopTech Sport Axle Packs Include:
- Cross Drilled and/or Slotted and/or Cross Drilled & Slotted high performance StopTech Sport Rotors for better cooling, shorter stops and reduced fade
- StopTech Sport Pads for aggressive street or track day use
- StopTech High Performance Stainless Steel Brake Lines for reduced system compliance and increased durability
StopTech Sport Kit Axle Packs are ideal for sports cars and sport sedans that are routinely driven hard on the street, autocrossed or tracked.
StopTech Sport Rotors:
Engineered to look good behind the wheel and perform at the same time
StopTech Sport Rotors look great behind custom wheels, improve the initial bite of the brake pads, and help wipe away the debris that forms between the pad and the disc. A set of StopTech rear replacement Sport Rotors is a great way to match the aesthetics of a StopTech Big Brake Kit.
Most StopTech Sport Rotors are finished with black e-coating on both sides of the hat, inside the cooling vanes, and on the outside edge. E-coating is a superior electro-statically applied finish designed to withstand 400 hours of salt water exposure without rusting. This is especially important on both mounting faces of the hat where it touches the hub flange and back face of the wheel. Any accumulation of rust in these area can lead to installed lateral run out issues.
Power Alloy Metallurgy
Power Alloy metallurgy is an exclusive feature of many StopTech rotors. In specific vehicle applications, StopTech works with foundry partners to increase the molybdenum or carbon content of the castings, and to carefully control the cooling rate during production to reach targets for hardness and tensile strength.
Cooling Vane Design
Nearly all StopTech 1-piece rotors have unique slot or hole patterns for the left and right sides of the vehicle. For these directional patterns, straight vane or pillar vane rotors are used to ensure that a drilled hole never touches a cooling vane.
StopTech Sport Brake Pads:
- High MOT to Eliminate Fade
- Excellent Actuation, Modulation and Release
- Positive Molded for Uniform Friction Material
- Scorched to Raise Initial Cold Effectiveness
- Para-Aramid Composites for Linear Response
- Dyno Proven Performance and Service Life
- Lab-Developed Formulas with Strong Initial Bite
- Ideal for Autocross and Light Track Day Use
StopTech Stainless Steel Brake Lines:
Stoptech Stainless Steel Braided Brake Lines provide a quicker, firmer, more consistent pedal response by maintaining consistent brake pressure. Additionally, stainless steel lines provide precision brake modulation, especially during threshold braking. The improvement in pedal feel is more dramatic on older vehicles where the factory rubber line may have softened and swelled due to age.
StopTech brake lines consist of a PTFE (commonly referred to as Teflon) inner line that carries the brake fluid, which is then covered with a layer of stainless steel woven braid. The PTFE tube is very resistant to expansion under pressure and will not degrade from exposure to brake fluid.
The braided stainless steel provides support for the PTFE and the weave is extremely durable against incidental impact and abrasion. Next the stainless braided hose is coated with a clear abrasion resistant PVC cover for maximum protection against chaffing and strain relief devices reinforce end fittings.
A variety of end fittings are available to meet most application needs. All fittings are engineered for proper fit and durability. All necessary brackets and fasteners are included with each line kit.