call us for FREE estimate
Unitronic 4" Turbo Inlet Elbow for 2.5TFSI EVO
Unitronic 4" Turbo Inlet Elbow for 2.5TFSI EVO Unitronic 4" Turbo Inlet Elbow for 2.5TFSI EVO Unitronic 4" Turbo Inlet Elbow for 2.5TFSI EVO Unitronic 4" Turbo Inlet Elbow for 2.5TFSI EVO Unitronic 4" Turbo Inlet Elbow for 2.5TFSI EVO Unitronic 4" Turbo Inlet Elbow for 2.5TFSI EVO Unitronic 4" Turbo Inlet Elbow for 2.5TFSI EVO Unitronic 4" Turbo Inlet Elbow for 2.5TFSI EVO Unitronic 4" Turbo Inlet Elbow for 2.5TFSI EVO Unitronic 4" Turbo Inlet Elbow for 2.5TFSI EVO Unitronic 4" Turbo Inlet Elbow for 2.5TFSI EVO Unitronic 4" Turbo Inlet Elbow for 2.5TFSI EVO Unitronic 4" Turbo Inlet Elbow for 2.5TFSI EVO Unitronic 4" Turbo Inlet Elbow for 2.5TFSI EVO Unitronic 4" Turbo Inlet Elbow for 2.5TFSI EVO Unitronic 4" Turbo Inlet Elbow for 2.5TFSI EVO

Unitronic 4" Turbo Inlet Elbow for 2.5TFSI EVO

  • Weight
    4 lbs
  • SKU
    UH019-INA
Free shipping

Overall product design proceeds through, not only focusing on increasing overall performance of the product, but also the small and often overlooked aspects of the product’s design and function are of utmost importance to Unitronic.

  • $549.99
Qty:  

Unitronic 4" Turbo Inlet Elbow for 2.5TFSI EVO

Features / Benefits

  • 28% increase in flow over stock
  • Proven power, torque, and airflow gains
  • Modular CNC-machined billet Aluminum compressor inlet adapter rings
  • Fully integrated PCV recirculation artery
  • OEM PCV functionality for adequate crankcase ventilation
  • Aircraft grade cast Aluminum construction
  • CNC-machined mounting flanges, inlet and outlets
  • Smooth airflow transitions
  • Direct bolt-on fitment. (Does not work with stock intake.)

 

Hardware Included

  • Unitronic 4" Turbo Inlet Elbow for 2.5 TFSI EVO
  • 1 x Unitronic Adapter Ring (56.5 mm, 62.8 mm, 66 mm or 70 mm)
  • Wastegate Silicone Vacuum Line
  • All Necessary Hardware Included

Related Hardware

  • 2.5TFSI EVO 4 inch Turbo Inlet Elbow SRM (66mm) Adapter Ring
  • 2.5TFSI EVO 4 inch Turbo Inlet Elbow Stock Turbo (56.5mm) Adapter Ring
  • 2.5TFSI EVO 4 inch Turbo Inlet Elbow TTE625/700 (62.8mm) Adapter Ring
  • 2.5TFSI EVO 4 inch Turbo Inlet Elbow Xona710H/780H (70mm) Adapter Ring
  • 2.5TFSI EVO Spark Plug Set (NGK R7437-9) by Unitronic
  • Unitronic 3'' Turbo Inlet Elbow for 2.5 TFSI EVO
  • Unitronic MPI Injector Upgrade Kit for 2.5TFSI EVO

 

Airflow Validations

airflowtables25tfsiinletelbows.jpg
Using its in-house Superflow SF-1020 Flow Bench, Unitronic Engineers further validated designs to ensure that the Unitronic 4” Turbo Inlet effectively optimizes airflow in a variety of conditions. The OEM inlet yielded a peak flow rate of 581 CFM at 28” of H2O (Aq), while the Unitronic 4” Turbo Inlet Elbow achieved 744 CFM, for a gain of 28% over the OEM inlet.
 
 

Airflow Simulations

unitronic4inchinlet25tfsievors3ttrsflowsimulations1.jpegunitronic4inchinlet25tfsievors3ttrsflowsimulations3.jpeg
Overall product design proceeds through, not only focusing on increasing overall performance of the product, but also the small and often overlooked aspects of the product’s design and function are of utmost importance to Unitronic. With a product like this 4” Inlet, it was important for aspects such as positive crankcase ventilation (PCV) to be analyzed to ensure that the PCV system will continue to function as originally intended by Audi’s Engineers, allowing crankcase pressure to be properly ventilated, as we all know what can happen over the long term, when crankcase pressure is not properly managed. As a result, extra attention was spent to allow for a complete one-piece PCV design. In keeping consistent with the factory emissions and PCV systems, Unitronic’s fully integrated PCV routing functions as it was originally intended. A pressure plot of the PCV exit shows that it has been positioned for optimized function, aligned with the factory’s intent.
 
 

Modular Fitment

adaptersoptionsunitronic4inchturboinlet25tfsievob.jpg
Through the elimination of upstream [pre-compressor] restrictions, Unitronic’s new 4” Turbo Inlet Elbow improves the efficiency of the factory Borg-Warner turbocharger and is compatible with many mainstream stock frame hybrid turbochargers, including The Turbo Engineers TTE700, Iroz Xona 710H & 780H, Pure Turbos, and SRM/EC GTX35, through it’s versatile, precisely CNC-machined billet Aluminium compressor inlet adapters.
 

Install

The Unitronic 4 inch Turbo Inlet Elbow for vehicles equipped with the 2.5 TFSI EVO engine is designed to be simple to install with all the necessary hardware included. Installation time will take approximately one hour including the removal of the factory elbow and installation of your new Turbo Inlet Elbow.

NOTE: This product is compatible with Left Hand Drive (LHD) models only.
Does not work with stock intake.

Difficulty Level:
3 / 5
  • Weight
    4 lbs
  • SKU
    UH019-INA
  • Brand
    Unitronic
Make Model Year Engine
Audi TTRS Mk III (16+) 2.5 TFSI
Audi RS3 8V facelift (17+) 2.5 TFSI