The factory intercooler is not capable of consistently delivering repeated high power runs on an uprated car without suffering significant power losses as heat soak drives up air intake temperatures.
The VWR Intercooler System is the best performing intercooler upgrade on offer with proven race championship performance to back that up. The factory intercooler has shown itself to be unable to cope with the demands of higher power, hard driven cars.We offer two versions. One for the MQB-platform Golf 7 GTI, R and Audi S3 8V, and another for the A5-platform cars using the EA113 TFSI engine: Golf 5 GTI Golf 6 R, Scirocco R, Audi S3 8P, Leon Cupra Mk2 etc.By consistently reducing intake air temperatures (IAT), heat soak is minimised delivering increased performance again and again without the recovery cool-down times needed for the production intercooler. It really is essential for every stage of tuning on any high performance car.The giant 56mm core depth of our 'Plate & Bar' system uses careful optimised fin design, delivering the ‘sweet spot’ of maximum IAT cooling versus minimum pressure loss. This has allowed us to achieve increased size without increased lag. Don't confuse our Plate & Bar construction with the cheaper and less-effective Tube & Fin construction that many lower-quality aftermarket intercoolers use.HIGH EFFICIENCY Dramatically lower intake air temperatures (IAT) increases horsepower while minimizing the power-robbing heat soak from the standard 'cooler, time after time.MAXIMUM CORE SIZE The massive 'plate & bar' intercooler unit features a high-speed core using extra tall internal tubes for maximum boost flow.OPTIMUM LOCATION Careful maximisation of the factory location allows exceptional airflow across the intercooler core without impacting airflow behind it. SOPHISTICATED CORE DESIGN Highly effective UK-made aluminium plate & bar construction, with fully welded cast end tanks following rigorous testing to optimise core dimensions, fin density, and pipe flow. SMOOTH CAST END TANKS UK cast construction for minimal turbulence and restriction delivering maximum flow across the entire core depth. SIMPLE FITMENT Minimal modification required with no trimming, cutting, or any non-reversible modification required on Golf 7 (some trimming may be required on other MQB cars).
© 2001 - 2019 Eurocode Tuning. All rights reserved.