(310) 294-8108
call us for FREE estimate
IE Audi 3.0T Supercharged Performance ECU Tune | Fits B8/B8.5 S4. S5, C7 A6, A7, SQ5, Q5

IE Audi 3.0T Supercharged Performance ECU Tune | Fits B8/B8.5 S4. S5, C7 A6, A7, SQ5, Q5

Brand: Integrated Engineering
  • SKU
    IESOVJ11
Free shipping

Integrated Engineering ECU performance software for your 3.0T supercharged engine. 

 

  • $899.00
Qty:  

Integrated Engineering Software - Audi 3.0T Supercharged Performance ECU Tune | Fits B8/B8.5 S4. S5, C7 A6, A7, SQ5, Q5

WHICH TUNE IS RIGHT FOR YOU?

STAGE 1

Gain 87hp on stock hardware

  • Unleash hidden power in 30 minutes or less
  • No hardware upgrades required
  • Supports 91 or 93 octanes
  • RPM limit raised to 7200 RPM
  • Easy upgrade to Stage 2 (only pay the difference)
  • Compatible with IE Cold Air Intake
  • Compatible with IE DSG Tune
  • Requires IE POWERlink Flash Tool
  • Requires Windows 7+ powered device
  

STAGE 2 SINGLE PULLEY

Up to 492hp with a supercharger pulley upgrades

  • Software to match upgrade supercharger pulley
  • Supports 91, 93, 100, & 104 (race fuel) octanes
  • RPM limit raised to 7350 RPM
  • Includes optional exhaust crackle
  • Requires IE Supercharger Pulley Upgrade
  • Compatible with IE Cold Air Intake
  • Compatible with IE DSG Tune
  • Upgraded heat exchanger recommended
  • Requires IE POWERlink Flash Tool
  • Requires Windows 7+ powered device

 

Stage 2 Dual Pulley

Go all out with full bolt-ons for 534+hp

  • Software to match upgraded dual pulleys
  • Supports 91, 93, 100, & 104, and E40 octanes
  • RPM limit raised to 7350 RPM
  • Includes optional "true launch control"
  • Includes optional exhaust crackle
  • Includes optional throttle body upgrade tune
  • Requires IE Supercharger Pulley Upgrade
  • Requires IE Crank Pulley Upgrade
  • Requires IE DSG Tune
  • Requires upgraded heat exchanger
  • Compatible with IE Cold Air Intake
  • Compatible with IE Throttle Body Upgrade
  • Compatible with IE HPFP Upgrade
  • Compatible with custom ported chargers
  • Requires IE POWERlink Flash Tool
  • Requires Windows 7+ powered device

 

WHAT DOES AN ECU TUNE DO?

IE's record breaking software brings track-ready ECU programming to your Audi 3.0T supercharged engine while retaining factory comfort and reliability. Developed in-house, IE engineers are equipped with industry-leading tuning technology to completely reverse engineer the factory mapping and safely modify it to maximize performance. Years of professional tuning high-powered race vehicles and intimate knowledge of the VW & Audi engines results in a wicked fast car on the street or the track. Your new software tune is easily uploaded to your factory installed ECU (engine control module) without touching a wrench in your own driveway. Multiple tunes are available to match your stock or installed aftermarket hardware.

 

HOW DO I INSTALL THE TUNE?

IE's own in-house developed POWERlink cable and software gives you the freedom to quickly flash your car’s engine control unit (ECU) or transmission control unit (TCU) with your new IE performance tune. The cable simply plugs into your vehicle’s OBD-2 port, from there simply follow the on-screen directions to quickly upload the tune. Adding horsepower is as easy as clicking FLASH NOW!

The flash tool also grants instant access to upgrade tune stages, switch fuel octanes, flash back to stock, perform engine diagnostics, read/clear codes and gather high-quality operating data via logging.

System requirements:

Laptop or tablet with Wifi connection and USB port running Windows 7 or above operating system required. Powered by 32 or 64 bit processor with 1.0GHz or greater and 4GB of Ram.

 

EXHAUST CRACKLE

Give your supercharged engine an aggressive sporty sound. This new feature makes your S car sound like a true performance machine when you rev, decelerate, or let off the throttle for gear changes. This exhaust crackle is completely safe and entirely addicting. Optional feature included with stage 2 and dual pulley tunes.

 

TRUE LAUNCH CONTROL

IE's True Launch Control feature adds the motorsport function of two-step launch control built into the ECU software. This offers neck-breaking launches with engine load and boost built from a stop. This provides a large advantage over similarly powered vehicles. Optional feature included with dual pulley tune (2013+ B8.5 only)

 

THROTTLE BODY

This is for all the marbles, designed to completely unleash the complete performance potential from your supercharger by removing the factory throttle body limitation. This tune feature is for dual pulley setups that are also running our IE Throttle Body Upgrade Kit for the fastest S4 in town! Optional feature included with dual pulley tune and requires IE Throttle Body Upgrade (IEINCG3A).

 
 

E40 FUEL BLEND

The IE Stage 2 Dual Pulley Tune offers you tons of power potential on multiple octane options including support for E40. The direct injection factory fuel system cannot safely support the amount of fuel needed for full E85 fuel, even with an HPFP upgrade, however, it can support a maximum blend of ethanol to E40. This E40 blend is an ethanol mix of E85 with regular pump 91/93 fuel (about 2/5ths E85 and 3/5ths 91/93 with E10 premium gas). To run this fuel safely, it must be pre-mixed and verified before filling into an empty tank. You can read our blog article on how to safely blend ethanol HERE. Optional feature included with dual pulley tune.

 

CATALYTIC CONVERTERS

IE's pump fuel 91/93 tunes are specially calibrated with safe air to fuel mixtures that inhibit "knocking". These mixtures also provide cooler exhaust gas temperature and thus are safer for the 3.0T's fragile catalytic converters than many competition tunes. Higher octanes are intended for higher power output and do not guarantee factory catalytic converter safety.

 

INCREASED RPM


IE 3.0T Tunes continue to make power beyond the factory rev limiter, to take advantage of the larger power band, the rev limits have been raised. Stage 1 tunes include a new RPM range of 7200RPM while Stage 2 and Dual Pulley is raised to 7350RPM. On S-Tronic (DSG) equipped cars, our DSG Tune is required to unlock these higher RPM ranges. DSG Calibration will shift slightly before these rev limiters.

 
  • SKU
    IESOVJ11
  • Brand
    Integrated Engineering
  • Add Powerlink Module
    No, Yes
  • Tune Selection
    Stage 1, Stage 2 Single Pulley, Stage 2 Dual Pulley
  • Powerlink Serial Numer
    This is if you already one a Powerlink
Make Model Year Engine
Audi S4 B8 (10-12) 3.0T
Audi S4 B8.5 (13-17) 3.0T
Audi S5 B8 (08-12) 3.0T
Audi S5 B8.5 (13-17) 3.0T
Audi Q5 8R (09-17) 3.0T
Audi SQ5 8R (14-17) 3.0T
Audi A6 C7 (12-15) 3.0T
Audi A6 C7.5 (16-19) 3.0T
Audi A7 C7 (11-15) 3.0T
Audi A7 C7.5 (16-18) 3.0T