call us for FREE estimate
EuroCode ÜSS Adjustable Sway Bar Set C7 Chassis
EuroCode ÜSS Adjustable Sway Bar Set C7 Chassis EuroCode ÜSS Adjustable Sway Bar Set C7 Chassis EuroCode ÜSS Adjustable Sway Bar Set C7 Chassis EuroCode ÜSS Adjustable Sway Bar Set C7 Chassis EuroCode ÜSS Adjustable Sway Bar Set C7 Chassis

EuroCode ÜSS Adjustable Sway Bar Set C7 Chassis

  • Weight
    25 lbs
  • SKU
    EC0202-0501R
Free shipping

Reduce body roll on your C7 A6/S6/RS6/A7/S7/RS7 with EuroCode’s sway bars. (32mm front and 25.5mm rear).

All C7 swaybar kits include the C7 rear fitment kit.

  • $463.50
  • Old price: $515.00 , you save $51.50
    • 10% off
Qty:  

EuroCode ÜSS Adjustable Sway Bar Set C7 Chassis | F - 32mm / R - 25.5mm

Reduce body roll on your Audi with EuroCode’s ÜSS Adjustable Stabilizer Bar Set.  These swaybars are just part of a more comprehensive suspension system that includes endlinks and a drivetrain stabilizer bar.  Even on its own, this upgrade will vastly improve cornering and sharp maneuvering even in daily driving situations (on ramps, evasive lane change, canyon carving).

What makes our swaybars better?

  • Great adjustability for your comfort or sport needs (full stiffness or 30% reduction)
  • Polyurethane bushings that replace the lackluster rubber bushings- this helps with flex absorption while also lasting much longer than rubber, which tends to lose flexibility
  • Perfect thickness for better handling without the harshness induced by road irregularities
  • A fully engineered system specific to particular Audi platforms- in other words, not a cookie cutter set of swaybars
  • Proudly manufactured in the USA

Testing and Development:

When EuroCode set out to develop the ÜSS system, we wanted to offer a product which would be superior to anything currently on the market. We took the H&R, Hotchkis, Stasis and Eibach bars, along with 3 of our prototypes to the track. After testing all those products (including our own) extensively, we finalized our bars and came up with a combination that basically leaves the competition in the dust.

The spirit of our Überlegenes Stabilisatoren System (ÜSS) is derived from our highly successful B8 chassis product; however it was fully engineered from the ground up for the C7 chassis. The purpose of the Überlegenes Stabilisatoren System is to mitigate the body roll that is very common in the C7 chassis, allowing the vehicle to feel more stable under lateral acceleration. This reduction in body roll will afford greater tire contact patch, improved traction and driver confidence. 

All C7 swaybar kits include the C7 rear fitment kit.

The factory repair manual calls for the bolts securing your sway bar to be replaced. They do so because the stretch bolts are to be used only one time.  We provide these bolts as an option.

Lowering the ride height on factory air suspension equipped cars alters the geometry of the control arm and may produce a slight misalignment of the end link. This includes S-Line model vehicles that have a lower ride height. To rectify this situation we include a fitment kit with every C7 swaybar set. We also recommend using this kit if you intend to set the rear sway bar to the stiffest setting regardless of ride height.

Installation Guide

Fitment Kit Installation Guide

  • Weight
    25 lbs
  • SKU
    EC0202-0501R
  • Brand
    Eurocode Tuning
  • Additional Hardware
    No Additional Hardware, Front Hardware Kit, Rear Hardware Kit, Front/Rear Hardware Kit
Make Model Year Engine
Audi A6 C7 (12-15) 2.0T
Audi A6 C7 (12-15) 3.0T
Audi A6 C7.5 (16-19) 3.0T
Audi A7 C7 (11-15) 3.0T
Audi A7 C7.5 (16-18) 3.0T
Audi RS7 C7 (13-18) 4.0T
Audi S6 C7 (12-13) 4.0T
Audi S6 C7.5 (14-19) 4.0T
Audi S7 C7 (12-13) 4.0T
Audi S7 C7.5 (14-19) 4.0T
Audi RS6 C7 (13-18) 4.0T

Related products